Biodeterioration refers to the unwanted alteration of materials caused by microorganisms—especially fungi—which damage both organic substrates (paper, wood, textiles) and inorganic ones (stone, plaster, glass). Unlike abiotic decay, biodeterioration results from biological activity that produces physical disruption and chemical degradation.Physical deterioration occurs as fungal hyphae penetrate pores, cracks, and surface irregularities. Hyphal turgor pressure, thigmotropic growth along...

When hardened concrete is exposed to air with a relative humidity of less than 100 percent, it begins to lose the free water within its capillaries. As this water evaporates, the water initially adsorbed onto the calcium silicate hydrates migrates towards these now empty spaces and eventually evaporates as well. Over time, as more water leaves, the volume of the concrete decreases, a phenomenon known as drying shrinkage.
A portion of this drying shrinkage can be reversed; if the concrete is...

Concrete members with a small surface-to-volume ratio are cured by oiling and moistening the forms before casting the concrete member. These forms can be left in place for a prolonged period to prevent moisture loss, and can be wetted if made of a material suitable for wetting. If the forms are removed early, the concrete member is moistened and covered with polythene sheets to maintain moisture. For large horizontal concrete surfaces exposed to dry weather, a temporary covering is suspended...

Atmospheric CO2 penetrates the concrete's pores and, in the presence of moisture, forms carbonic acid, which then reacts with calcium hydroxide in the hydrated cement, forming calcium carbonate. This process reduces the concrete's volume and is termed carbonation shrinkage.
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction facilitates the...

Microbial food spoilage refers to the degradation of food quality resulting from the metabolic activity of microorganisms such as bacteria, yeasts, and molds. These microbes proliferate on various food substrates depending on factors such as moisture content, nutrient availability, and storage conditions, leading to undesirable sensory and structural changes.Bacteria are primary agents of spoilage in high-moisture, nutrient-dense foods like meat, milk, and vegetables. Microbial spoilage occurs...

Bleeding in fresh concrete occurs when water from the mix rises to the surface. This happens because the mix's solid components fail to retain all the water as they settle, leading to separation where water collects at the top. The severity of bleeding can be measured by assessing the total settlement or by noting the decrease in height per unit height of concrete.
Bleeding can cause several issues in the concrete structure. Sometimes, the rising water gets trapped beneath large aggregate...