Separation and purification of phycocyanin from Spirulina sp. using a membrane process
Related Experiment Video
Updated: Jun 2, 2026

Isolation and Characterization of Intact Phycobilisome in Cyanobacteria
Published on: November 10, 2021
Ratana Chaiklahan1, Nattayaporn Chirasuwan, Veara Loha
1Pilot Plant Development and Training Institute, King Mongkut's University of Technology Thonburi, Bangkhuntien, Bangkok 10150, Thailand. ratana.cha@kmutt.ac.th
Abstract:
The highest purity ratio of phycocyanin extract was obtained when fresh biomass was used as raw material. The crude extract was purified by membrane process using microfiltration and ultrafiltration. Membrane of pore sizes 5 μm, at feed flow rate of 150 mL min(-1), permeate flux of 58.5 L h(-1)m(-2) was selected for coarse filtration and membrane with pore size 0.8/0.2 μm at the flow rate of 100 mL min(-1), permeate flux of 336 L h(-1)m(-2) was selected for fine filtration, giving phycocyanin recovery of 88.6% and 82.9%, respectively. For ultrafiltration, membrane with MWCO at 50 kDa, 69 kPa and 75 mL min(-1) of flow rate with a mean permeate flux 26.8 L h(-1)m(-2) and a retention rate of 99% was found to be optimal. Under these filtration conditions, food grade phycocyanin with the purity around 1.0 containing c-phycocyanin as the major component was obtained.
Related Concept Videos
Downstream Processing
Overview Of Cell Separation And Isolation
