Estimation of in vivo ACL force changes in response to increased weightbearing

Accurate knowledge of in vivo anterior cruciate ligament (ACL) forces is instrumental for understanding normal ACL function and improving surgical ACL reconstruction techniques. The objective of this study was to estimate the change in ACL forces under in vivo loading conditions using a noninvasive technique. A combination of magnetic resonance and dual fluoroscopic imaging system was used to determine ACL in vivo elongation during controlled weightbearing at discrete flexion angles, and a robotic testing system was utilized to determine the ACL force-elongation data in vitro. The in vivo ACL elongation data were mapped to the in vitro ACL force-elongation curve to estimate the change in in vivo ACL forces in response to full body weightbearing using a weighted mean statistical method. The data demonstrated that by assuming that there was no tension in the ACL under zero weightbearing, the changes in in vivo ACL force caused by full body weightbearing were 131.4 ± 16.8 N at 15 deg, 106.7 ± 11.2 N at 30 deg, and 34.6 ± 4.5 N at 45 deg of flexion. However, when the assumed tension in the ACL under zero weightbearing was over 20 N, the change in the estimated ACL force in response to the full body weightbearing approached an asymptotic value. With an assumed ACL tension of 40 N under zero weightbearing, the full body weight caused an ACL force increase in 202.7 ± 27.6 N at 15 deg, 184.9 ± 22.5 N at 30 deg, and 98.6 ± 11.7 N at 45 deg of flexion. The in vivo ACL forces were dependent on the flexion angle with higher force changes at low flexion angles. Under full body weightbearing, the ACL may experience less than 250 N. These data may provide a valuable insight into the biomechanical behavior of the ACL under in vivo loading conditions.