Related Experiment Video
Updated: Jun 1, 2026

Automated 90Sr Separation and Preconcentration in a Lab-on-Valve System at Ppq Level
Published on: June 6, 2018
Lab on valve-multisyringe flow injection system (LOV-MSFIA) for fully automated uranium determination in
Jessica Avivar1, Laura Ferrer, Montserrat Casas
1Chemistry Department, University of the Balearic Islands, Cra. Valldemossa km 7.5, 07122 Palma, Spain.
Abstract:
The hyphenation of lab-on-valve (LOV) and multisyringe flow analysis (MSFIA), coupled to a long path length liquid waveguide capillary cell (LWCC), allows the spectrophotometric determination of uranium in different types of environmental sample matrices, without any manual pre-treatment, and achieving high selectivity and sensitivity levels. On-line separation and preconcentration of uranium is carried out by means of UTEVA resin. The potential of the LOV-MSFIA makes possible the fully automation of the system by the in-line regeneration of the column. After elution, uranium(VI) is spectrophotometrically detected after reaction with arsenazo-III. The determination of levels of uranium present in environmental samples is required in order to establish an environmental control. Thus, we propose a rapid, cheap and fully automated method to determine uranium(VI) in environmental samples. The limit of detection reached is 1.9 ηg of uranium and depending on the preconcentrated volume; it results in ppt levels (10.3 ηg L(-1)). Different water sample matrices (seawater, well water, freshwater, tap water and mineral water) and a phosphogypsum sample (with natural uranium content) were satisfactorily analyzed.
Related Concept Videos
Atomic Fluorescence Spectroscopy
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Microbial Bioremediation of Uranium
