Related Experiment Video
Updated: May 29, 2026

Scanning-probe Single-electron Capacitance Spectroscopy
Published on: July 30, 2013
In situ metal tip sharpening of scanning probe microscopes
Wenlong Yang1, Huiliang Zhang, Changdong Kim
1Department of Physics, Texas A&M University, College Station, Texas, USA.
Abstract:
This article demonstrated a new approach for fabrication and sharpening of metal tips of scanning probe microscopes. Experimentally, a metal tip was heated and melted by a focused laser light. The tip was then sharpened by a strong electric field and consolidated as the laser was turned off. With a low-vacuum and a high-voltage source, a 25-µm indium-coated platinum wire was sharpened to a tip with diameters below 50 nm. The minimal tip radius by this method is estimated to be below 1 nm. With this technique, in situ tip sharpening for SPM would be possible.
More Related Videos
06:58Electrochemical Etching and Characterization of Sharp Field Emission Points for Electron Impact Ionization
Published on: July 12, 2016
12:18Co-localizing Kelvin Probe Force Microscopy with Other Microscopies and Spectroscopies: Selected Applications in Corrosion Characterization of Alloys
Published on: June 27, 2022
Related Concept Videos
Atomic Force Microscopy
The AFM Probe
The probe is regarded as the heart of any AFM setup and comprises the...
Overview of Microscopy Techniques