Related Experiment Video
Updated: May 29, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
The recycling of Mn-Zn ferrite wastes through a hydrometallurgical route
Kangkang Li1, Changhong Peng, Kaiqi Jiang
1School of Metallurgical Science and Engineering, Central South University, Changsha 410083, PR China.
Abstract:
A novel recycling route using acid leaching, reduction, purification, co-precipitation and traditional ceramic process was applied to process the Mn-Zn ferrite wastes and prepare the corresponding high permeability soft magnetic product. Above 95% of Fe, Mn, Zn in the waste materials could be recycled in the form of Mn-Zn ferrite products through the hydrometallurgical route. The comprehensive properties of Mn-Zn ferrite prepared from wastes by this route have broader frequency characteristics, higher resistivity, lower loss coefficient and temperature coefficient as compared to the A102 product (Acme Electronics Corporation, Taiwan). Moreover, the cost of this recycling technology has economical advantage over the traditional ceramic process, which holds a promising industrial application.
Related Concept Videos
Microbial Leaching
Acid Mine Drainage
Microbes and Other Elemental Cycles
Steel Manufacturing
During this smelting process, limestone plays a crucial role by forming slag. Slag captures impurities within the molten iron, such...
Washing, Drying, and Ignition of Precipitates
Microbial Fuel Cells
