Related Experiment Video

Updated: May 29, 2026

Development of a Microfluidics-Based Approach for Investigating Microtubule Polymer Mechanics
06:03

Development of a Microfluidics-Based Approach for Investigating Microtubule Polymer Mechanics

Published on: May 30, 2025

Prediction of bending stiffness and deformed shape of non-axially compressed microtubule by a semi-analytical

Esmaeal Ghavanloo, Farhang Daneshmand, Marco Amabili

    Journal of Biological Physics
    |September 3, 2011
    PubMed

    Keywords:
    Bending stiffnessDeformed shapeMicrotubuleSemi-analytical method

    More Related Videos

    Flexural Rigidity Measurements of Biopolymers Using Gliding Assays07:55

    Flexural Rigidity Measurements of Biopolymers Using Gliding Assays

    Published on: November 9, 2012

    Directly Measuring Forces Within Reconstituted Active Microtubule Bundles07:47

    Directly Measuring Forces Within Reconstituted Active Microtubule Bundles

    Published on: May 10, 2022

    Related Concept Videos

    Bending of Curved Members - Strain Analysis01:14

    Bending of Curved Members - Strain Analysis

    The mechanics of deformation in curved members, such as beams or arches, under bending moments, involve complex responses. When such a member, symmetric about the y-axis and shaped like a segment of a circle centered at point C, is subjected to equal and opposite forces, its curvature and surface lengths change significantly. This alteration results in the shift of the curvature's center from C to C', indicating a tighter curve.
    The important part of bending analysis for such a member is the...
    Stresses under Combined Loadings01:23

    Stresses under Combined Loadings

    When analyzing a bent tube with a circular cross-section subjected to multiple forces, it is crucial to determine the stress distribution in order to maintain structural integrity under varied load conditions.
    The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
    Residual Stresses in Bending01:18

    Residual Stresses in Bending

    In the study of elastoplastic members subjected to bending moments, understanding the loading and unloading phases is crucial for assessing material behavior and structural integrity. During the loading phase, as the bending moment increases, the material initially responds elastically, adhering to Hooke's Law, where stress is directly proportional to strain. When the load exceeds the yield strength, plastic deformation occurs, resulting in permanent strain and deformation that remains even...
    Deformations in a Symmetric Member in Bending01:18

    Deformations in a Symmetric Member in Bending

    When analyzing the deformation of a symmetric prismatic member subjected to bending by equal and opposite couples, it becomes clear that as the member bends, the originally straight lines on its wider faces curve into circular arcs, with a constant radius centered at a point known as Point C. This phenomenon helps to understand the stress and strain distribution within the member more clearly.
    When the member is segmented into tiny cubic elements, it is observed that the primary stress...
    Flexural Stress01:16

    Flexural Stress

    When analyzing bending in symmetric members, it's crucial to understand how stresses distribute when subjected to bending moments. This stress distribution is effectively described by applying fundamental mechanics and material science principles, particularly Hooke's Law for elastic materials.
    Hooke's Law states that within the material's elastic limits, stress is directly proportional to strain. In a member experiencing a bending moment, the strain at any point is relative to its distance...
    Members Made of Elastoplastic Material01:19

    Members Made of Elastoplastic Material

    The behavior of elastoplastic materials under bending stresses, particularly in structural members with rectangular cross-sections, is crucial for predicting material responses and understanding failure modes. Initially, when a bending moment is applied, the stress distribution across the section follows Hooke's Law and is linear and elastic. This distribution means the stress increases from the neutral axis to the maximum at the outer fibers, up to the elastic limit.
    As the bending moment...