Related Experiment Video
Updated: May 29, 2026

A Synthetic Methodology for Preparing Impregnated and Grafted Amine-Based Silica Composites for Carbon Capture
Published on: September 29, 2023
Amine-based nanofibrillated cellulose as adsorbent for CO₂ capture from air
Christoph Gebald1, Jan Andre Wurzbacher, Philippe Tingaut
1Department of Mechanical and Process Engineering, ETH Zürich, 8092 Zurich, Switzerland. aldo.steinfeld@ethz.ch
Abstract:
A novel amine-based adsorbent for CO₂ capture from air was developed, which uses biogenic raw materials and an environmentally benign synthesis route without organic solvents. The adsorbent was synthesized through freeze-drying an aqueous suspension of nanofibrillated cellulose (NFC) and N-(2-aminoethyl)-3-aminopropylmethyldimethoxysilane (AEAPDMS). At a CO₂ concentration of 506 ppm in air and a relative humidity of 40% at 25 °C, 1.39 mmol CO₂/g was absorbed after 12 h. Stability was examined for over 20 consecutive 2-h-adsorption/1-h-desorption cycles, yielding a cyclic capacity of 0.695 mmol CO₂/g.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
11:26Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014