Evaluation of 2D and 3D navigation for iliosacral screw fixation

Image guidance is essential in some orthopedic surgical procedures, especially iliosacral screw fixation. Currently, there is no consensus regarding the best image guidance technique. An ex-vivo study was performed to compare conventional, 2-dimensional (2D), and 3D imaging techniques and determine the optimal image guidance technique for pelvic surgery.

Plastic (n = 9) and donated cadaver pelvises (n = 8) were evaluated in the laboratory. The pelvises were positioned on radiolucent operation tables in a prone position. Transiliosacral screws were inserted without or with 2D- and 3D-navigational support. A digital mobile X-ray unit with flat-panel fluoroscopy and navigation software was used to measure precision, radiation exposure, and time requirements.

2D-navigation resulted in 40% incorrect screw positioning for the cadavers, 6% for the plastic phantoms, and 21% overall. The highest accuracy was accomplished with 3D-navigation (plastic: 100%; cadavers: 83%; p < 0.05). The dose-area product showed that both 2D- and 3D-navigation required increased exposure compared to the conventional technique (p < 0.01). For both plastic and cadaver specimens, navigated techniques required significantly longer times for screw insertion than the conventional technique (p < 0.01).

3D image guidance for transiliosacral screw fixation enabled more accurate screw placement in S1 and S2 vertebrae. However, radiation exposure in 3D-navigation was excessive; thus, we recommend avoiding 3D-navigation in young patients. A primary advantage of 3D-navigation was that the operating team could leave the room during the scan; thus, it reduced their radiation exposure. Moreover, the time required for screw insertion with 3D-navigation was similar to that required in the conventional technique; thus, 3D-navigation is recommended for older patients.