Related Experiment Video
Updated: May 28, 2026

A Stable Phantom Material for Optical and Acoustic Imaging
Published on: June 16, 2023
Relating the performance of time-reversal-based underwater acoustic communications in different shallow water
1Naval Research Laboratory, Washington, DC 20375, USA. yang@wave.nrl.navy.mil
Abstract:
The performance of underwater acoustic communications, such as the output signal-to-noise ratio (OSNR), is generally dependent on the channel specifics, hence a channel model is normally required as the performance of the channel equalizer depends on the number of tap coefficients used (e.g., a sparse equalizer) which are different for different oceans having different multipath arrivals. This letter presents theoretical arguments, and experimental data from different oceans that suggest that the increase of OSNR with the number of diverse receivers (in terms of the effective number of receivers) and the decrease of OSNR with the channel-estimation error follow a universal relationship using the time-reversal or correlation-based equalizer, despite the fact that the channels have very different properties. The reason is due to the fact that the OSNR is a function of the q function, the auto-correlation of the received impulse responses summed over all receiver channels, and the q function is approximately the same for all shallow waters given a sufficient (≥4-6) number of receivers.
Related Concept Videos
Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case, then the...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Basic Operations on Signals
Time Reversal mirrors a continuous-time signal about the vertical axis at t=0. This is achieved by substituting t with −t. For example, if a signal x(t) is considered, the time-reversed signal is x(−t). This operation can be graphically represented, showing the mirrored signal.
Sound Waves: Interference

