Related Experiment Video
Updated: May 27, 2026

Vacuum-Sealed Hot Water Bath Immersion for the Preparation of Anatomical and Surgical Cadaveric Bone Models
Published on: December 2, 2022
Decontamination of carcasses by vacuum-hot water cleaning and steam pasteurizing during routine operations at a beef
1Agriculture and Agri-Food Canada Research Centre, 6000 C and E Trail, Lacombe, Alberta, Canada, T4L 1W1.
Abstract:
The microbiological effects of three operations for cleaning areas on dressed beef carcasses with vacuuming equipment which also applies hot water to the carcass, and of an operation for pasteurizing beef carcass sides with steam, were assessed. All four operations were routine in a commercial carcass dressing process. For each operation, swab samples were obtained from randomly selected carcasses, with a single sample being collected from each carcass, from a site selected at random from those affected by the operation. For the cleaning operations, 25 samples were obtained before and 25 after each operation. For the pasteurizing operation, 50 samples were obtained before and 50 after the operation. In addition, 50 samples were obtained from beef sides after the carcass cooling process which followed the pasteurizing operation. Total aerobic counts, coliforms and Escherichia coli from each sample were enumerated. The cleaning operations generally reduced the log mean numbers of bacteria on treated areas by ≤ 0.5 and had no discernible effect on the overall microbiological condition of the carcasses emerging from the process. The pasteurizing operation reduced the log mean numbers of total aerobic bacteria on carcasses by about 1, and the log mean numbers of coliforms and E. coli by > 2. The cooling process had no affect on the total counts, but further reduced the log mean numbers of coliforms and E. coli, apparently by about 1, to give beef sides from which E. coli were not recovered.
Related Concept Videos
Pasteurization and Food Preservation
Physical Methods for Controlling Microbial Growth: Temperature
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Hazard Analysis and Critical Control Points (HACCP)

