Efficient organic photovoltaic devices by using PEDOT:PSSs with excellent hole extraction ability

We have demonstrated the poly(3-hexyl-thiophene-1,5-diyl) (P3HT):[6,6]-phenyl C61-butyric acid methyl ester (PCBM) bulk heterojunction (BHJ) organic photovoltaic (OPV) devices on various poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSSs). The device with PEDOT:PSS of PH 500 adding 1% dimethyl sulfoxide (DMSO) showed the best performances in term of the fill factor and power conversion efficiency (PCE) than others. The hole extraction ability of PEDOT:PSS is very important to balance between holes and electrons mobility because the carrier mobility of PCBM (approximately 10(-4) cm2/Vs) is higher than that of P3HT (approximately 10(-6) cm2/Vs) in P3HT:PCBM BHJ structure. The optimized BHJ OPV with PEDOT:PSS of PH 500 adding 1% DMSO showed a short-circuit current density of 8.92 mA/cm2 and a PCE of 2.97%, which was nearly increased to 2.5 times than that of control device with PEDOT:PSS of P VP Al 4083.