Related Experiment Video
Updated: May 27, 2026

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating
Published on: April 12, 2018
Post annealing effect on the electrical properties of top-gate SWNT network transistors
Un Jeong Kim1, D Y Suh, S C Min
1Frontier Research Laboratory, Samsung Advanced Institute of Technology, Yongin 449-901, Korea.
Abstract:
High performance top-gate single walled carbon nanotube network transistors are fabricated with aluminum oxide (Al2O3) layer as a gate dielectric by atomic layer deposition. It exhibits large on/off ratio (>10(4)) due to selective growth of semiconducting tubes by the plasma enhanced chemical vapor deposition. I-V characteristics show p-type or n-type depending on the deposition temperature. We investigate the type dependent characteristics for the carrier polarities with the post annealing effect on the top-gate SWNT network transistors. The dramatic change in the polarity of the top-gate SWNT network transistors, from n-type to p-type due to conversion of I-V characteristics is observed by post-annealing at 350 degrees C for 30 minutes under vacuum. Our observation suggests that competition between electron transfer from the Al2O3 layers to the SWNT surface and electron capture by oxygen molecules adsorbed on the tube walls seems to be the key point for the V(th) change as a function of Al2O3 deposition temperature.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
P-N junction
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
Field Effect Transistor
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...

