Related Experiment Video
Updated: May 26, 2026

Design and Construction of an Urban Runoff Research Facility
Published on: August 8, 2014
Priority pollutants in urban stormwater: part 1 - case of separate storm sewers
Sally Zgheib1, Régis Moilleron, Ghassan Chebbo
1Université Paris-Est, LEESU, UMR MA 102, AgroParisTech, 77455 Marne-la-Vallée 2, France.
Abstract:
Organic and mineral pollutants have become part of today's urban environment. During a rain event, stormwater quality as well as the corresponding contaminant loads is affected by both atmospheric deposition and the various types of impervious surfaces (roads, rooftops, parking lots etc.) on which runoff occurs. This study provides results on stormwater pollution in Paris and its suburbs from three separate storm sewers (n=20 samples). These results show that the stormwater had been contaminated by 55 chemical substances out of the 88 investigated. A particular attention was given to stormwater particle contamination. Concentrations are provided for: metals, PAHs, PCBs, organotins, alkylphenols, phthalates, pesticides, and VOCs. Our findings are among the first available in the literature since the relevant analyses were all conducted on both the particulate (P) and dissolved (D) phases. For most substances, particles from the three storm sewers were more heavily contaminated than dredged sediments and settleable particles from the Seine River. As a consequence of this finding, the release of untreated stormwater discharges may impact the receiving waters and contribute to sediment contamination.
More Related Videos
Related Concept Videos
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Precipitation and Co-precipitation
Single Pipe Systems
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are known. The...
Environmental Applications of Microorganisms
Design Example: Analyzing Capacity Contours for Flood Risk Assessment

