Related Experiment Video
Updated: May 24, 2026
Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes
Published on: November 16, 2018
Characteristics of organic light emitting diodes with vanadium oxide solution-treated indium tin oxide
Chao Kong1, Zheng Xu, Suling Zhao
1Key Laboratory of Luminescence and Optical Information, Beijing Jiaotong University, Ministry of Education, Beijing 100044, China.
Abstract:
The effect of indium tin oxide (ITO) in organic light emitting diodes (OLEDs) treated by vanadium penoxide (V2O5) saturation solution was studied. The device with ITO treated by ultraviolet-ozone (UV-ozone) was fabricated in the same run for comparison. It was found that the V2O5 solution-treated devices have much higher current efficiency compared to the device with bare ITO and UV-ozone-treated ITO as the anode. The turn-on voltages were reduced by around 2.5 V, and the luminances were about 1.69 times greater than that of the conventional device at 16 V driving voltage. Series resistances were determined by the slope of the current-voltage curve and the ac impedance spectroscopy technique.
