Related Experiment Video
Updated: May 23, 2026

Quantitative Analysis of Vacuum Induction Melting by Laser-induced Breakdown Spectroscopy
Published on: June 10, 2019
[Study on measurement of trace heavy metal Ni in water by laser induced breakdown spectroscopy technique]
Huan Shi1, Nan-jing Zhao, Chun-long Wang
1Key Laboratory of Environment Optics & Technology, Institute of Anhui Optics Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China. hshi@aiofm.ac.cn
Abstract:
The spectroscopy emission characteristics and the detection limit of trace heavy metal nickel in water was studied based on laser induced breakdown spectroscopy technique, with a 1,064 nm wavelength Nd : YAG laser as excitation source, and the echelle spectrometer and ICCD detector were used for spectral separation and high sensitive detection with high resolution and wide spectral range. A round flat solid state graphite as matrix was used for element enrichment for reducing water splashing, extending the plasma lifetime and improving the detection sensitivity, and the experimental sample was prepared by titrating a fixed volume of nickel nitrate solution of different concentrations on a fixed area of the graphite matrix. The results show that the better detection delay time is about 700 ns, the spectrum intensity raises with the concentration increase, a good linear relationship is presented at low concentration with a correlation coefficient 0.996 1, and the lower limit of detection of nickel in water with 0.28 mg x L(-1) was retrieved. A measurement method for further study of trace heavy metals in water is provided with laser induced breakdown spectroscopy technique.
More Related Videos
10:17Laser-induced Breakdown Spectroscopy: A New Approach for Nanoparticle's Mapping and Quantification in Organ Tissue
Published on: June 18, 2014
09:40Measurement and Analysis of Atomic Hydrogen and Diatomic Molecular AlO, C2, CN, and TiO Spectra Following Laser-induced Optical Breakdown
Published on: February 14, 2014