Related Experiment Video
Updated: May 22, 2026
10:19
Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
A review on dynamic membrane filtration: materials, applications and future perspectives
Mustafa Evren Ersahin1, Hale Ozgun, Recep Kaan Dereli
1Department of Watermanagement, Section Sanitary Engineering, Delft University of Technology, P.O. Box 5048, 2600 GA Delft, The Netherlands. ersahin@itu.edu.tr
Bioresource Technology
|April 27, 2012
Summary
Dynamic membrane (DM) filtration offers a promising, low-fouling, and energy-efficient alternative to membrane bioreactor (MBR) systems for wastewater treatment. This review explores DM technology
Area of Science:
- Environmental Science
- Chemical Engineering
- Water Treatment Technology
Background:
- Membrane bioreactor (MBR) systems are widely used but face challenges with fouling and energy consumption.
- Dynamic membrane (DM) filtration, utilizing a physical barrier with a formed cake layer, presents an emerging alternative.
- Current applications of DM in biological wastewater treatment are nascent.
Purpose of the Study:
- To comprehensively evaluate the current status of dynamic membrane (DM) technology.
- To assess DM as a viable alternative to membrane bioreactor (MBR) systems in wastewater treatment.
- To review advancements in DM materials and configurations.
Main Methods:
- Literature review of dynamic membrane technology.
- Analysis of factors influencing DM performance.
- Discussion of state-of-the-art DM materials and configurations.
Main Results:
- Dynamic filtration exhibits lower fouling risk, reduced energy requirements, and decreased capital costs compared to MBR.
- Key factors affecting DM performance and optimal operation strategies are identified.
- Current DM applications in biological wastewater treatment are limited but show potential.
Conclusions:
- Dynamic membrane technology presents a cost-effective and efficient alternative for wastewater treatment.
- Further research and development are needed to enhance DM applicability and performance.
- Optimizing DM materials and configurations is crucial for broader adoption.
Related Concept Videos
00:53Filtration
Filtration is a physical separation process that involves passing a suspension through a porous medium to separate solids from fluids. During filtration, solids collect on the porous medium while liquids, also collectively known as the filtrate, pass through. The filtration medium is selected based on the filtration purpose, quantity, and nature of the precipitate. The general criteria for a suitable filtering medium are that it is inert, mechanically strong, nonabsorbent toward dissolved...
01:15Dialysis
Dialysis is a diffusion-based purification process that separates analyte molecules from a complex matrix. This is accomplished by allowing molecules in the solution to pass through a semipermeable membrane into a liquid on the other side. The membrane is usually made of cellulose acetate or cellulose nitrate, and the second liquid must be miscible with the solution. Ions (e.g., chloride or sodium) or organic molecules (e.g., glucose) can pass through the membrane pores, which generally have...
01:18Detergent Purification of Membrane Proteins
Detergents are used to purify the integral proteins of the membrane. The hydrophobic portion of the detergent can replace membrane phospholipids while solubilizing the membrane proteins. When detergent monomers reach a specific concentration in a solution called critical micelle concentration (CMC), they form micelles. Above CMC, the concentration of the detergent monomers remains in equilibrium with the micelle. The number of detergent monomers present in the CMC varies for each detergent, and...
01:23Membrane Fluidity
Cell membranes are composed of phospholipids, proteins, and carbohydrates loosely attached to one another through chemical interactions. Molecules are generally able to move about in the plane of the membrane, giving the membrane its flexible nature called fluidity. Two other features of the membrane contribute to membrane fluidity: the chemical structure of the phospholipids and the presence of cholesterol in the membrane.