Related Experiment Video
Updated: May 22, 2026

Nanoscale Characterization of Liquid-Solid Interfaces by Coupling Cryo-Focused Ion Beam Milling with Scanning Electron Microscopy and Spectroscopy
Published on: July 14, 2022
Nanoscale chemical and structural characterization of transient metallic nanowires using aberration-corrected
Santhana K Eswara Moorthy1, Olivier Rousseau, Michel Viret
1Laboratoire de Physique des Solides, CNRS, UMR 8502, Université Paris Sud, F-91405 Orsay, France.
Abstract:
Direct chemical and structural characterization of transient iron-nickel alloy nanowires was performed at subnanometer spatial resolution using probe spherical aberration-corrected scanning transmission electron microscopy and electron energy-loss spectroscopy. Nanowires with diameter less than 2 nm retaining their nominal bulk alloy composition were observed. In some cases, the nanowires were oxidized. Before rupture, a nanojunction as thin as three atoms in width could be imaged. The time-dependent structural analyses revealed the nanowire rupture mechanisms. It is found that the atoms on the {111} planes were the easiest to be removed by electron irradiation and fluctuations between low-energy and high-energy facets were observed. The hitherto unknown rich variety of structural and chemical behavior in alloyed magnetic nanojunctions should be considered for understanding their physical properties.

