Related Experiment Videos
Nonvolatile floating gate memory containing AgInSbTe-SiO2 nanocomposite layer and capping the HfO2/SiO2 composite
Kuo-Chang Chiang1, Tsung-Eong Hsieh
1Department of Materials Science and Engineering, National Chiao Tung University, 1001 Ta-Hsueh Road, Hsinchu 30010, Taiwan, Republic of China.
Abstract:
An extremely large memory window shift of about 30.7 V and high charge storage density =2.3 × 10(13) cm(-2) at ± 23 V gate voltage sweep were achieved in the nonvolatile floating gate memory (NFGM) device containing the AgInSbTe (AIST)-SiO(2) nanocomposite as the charge trap layer and HfO(2)/SiO(2) as the blocking oxide layer. Due to the deep trap sites formed by high-density AIST nanocrystals (NCs) in the nanocomposite matrix and the high-barrier-height feature of the composite blocking oxide layer, a good retention property of the device with a charge loss of about 16.1% at ± 15 V gate voltage stress for 10(4) s at the test temperature of 85 °C was observed. In addition to inhibiting the Hf diffusion into the programming layer, incorporation of the SiO(2) layer prepared by plasma-enhanced chemical vapor deposition in the sample provided a good Coulomb blockade effect and allowed significant charge storage in AIST NCs. Analytical results demonstrated the feasibility of an AIST-SiO(2) nanocomposite layer in memory device fabrication with a simplified processing method and post-annealing at a comparatively low temperature of 400 °C in comparison with previous NC-based NFGM studies.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...