Related Experiment Video
Updated: May 22, 2026

Extraction and Detection of Geosmin and 2-Methylisoborneol in Water and Fish using High-Capacity Sorptive Extraction Probes and GC-MS
Published on: July 3, 2025
Determination of polycyclic aromatic hydrocarbons in water samples using online microextraction by packed sorbent
Shuai Fu1, Jun Fan, Yuki Hashi
1Key Laboratory of Combinatorial Biosynthesis and Drug Discovery (Wuhan University), Ministry of Education, Wuhan University School of Pharmaceutical Sciences, Wuhan 430071, China.
Abstract:
A fully automated microextraction by packed sorbents (MEPS) coupled with large volume injection gas chromatography-mass spectrometry (GC-MS) has been developed for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. Naphthalene (Nap), pyrene (Pyr), anthracene, acenaphthylene, phenanthrene, fluoranthene (Flr), fluorene and acenaphthene were the PAHs studied. The performance of the microextraction-GC-MS protocol was compared with solid phase extraction (SPE) and GC-MS analysis. Under optimized experimental conditions, the methods were linear for all analytes in the following ranges: 0.05-2.0 μg L(-1) (MEPS) and 0.25-10.0 μg L(-1) (SPE). The correlation coefficients (R(2)) were in the range 0.9965-0.9997 (MEPS) and 0.9978-0.9998 (SPE) for all the analytes. Limits of detection (LODs) for 2 mL samples (MEPS) ranged from 0.8 ng L(-1) to 8.2 ng L(-1). LODs for 50 mL samples (SPE) were between 4.8 ng L(-1) and 35.9 ng L(-1). The two methods were successfully applied to the determination of the 8 PAHs in environmental waters, with recoveries in the range of 70-117% (MEPS) and 72-134% (SPE) for a real spiked sample. The two sample preparation processes showed good repeatabilities with intra-day relative standard deviations below 14.0% (MEPS) and 14.6% (SPE). Nap, Flr and Pyr were found in a river water sample.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Size-Exclusion Chromatography
Silica particles offer advantages such as rigidity,...

