Related Experiment Video
Updated: May 21, 2026
Spot Variation Fluorescence Correlation Spectroscopy for Analysis of Molecular Diffusion at the Plasma Membrane of Living Cells
Published on: November 12, 2020
Combined investigation of bulk diffusion and surface exchange parameters of silver catalyst coated yttrium-doped BSCF
P F Haworth1, S Smart, J M Serra
1The University of Queensland, FIMLab-Films and Inorganic Membrane Laboratory, School of Chemical Engineering, Brisbane, QLD 4072, Australia.
Abstract:
The combined effect of minor yttrium doping and silver catalyst deposition on the surface kinetics (k(chem)) and bulk diffusion (D(chem)) of BSCF (Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-δ)) perovskite membranes was explored using electrical conductivity relaxation (ECR) and validated using oxygen permeation measurements. Yttrium doping of BSCF to form Ba(0.5)Sr(0.5)Co(0.8)Fe(0.175)Y(0.025)O(3-δ) (BSCFY) improved both the surface exchange kinetics and the bulk diffusion by an average of 44% and 177% respectively, supporting improved oxygen permeation measurements. The deposition of a silver catalyst on BSCFY further improved the surface kinetics by 63-450% at intermediate operating temperatures (600-750 °C), and reduced the activation energy from 163 to 90 kJ mol(-1). Interestingly, these improvements did not translate into enhanced oxygen fluxes for the silver coated thicker 0.5 and 1 mm membranes, indicating that the oxygen ion transport was limited by bulk diffusion. However, oxygen permeation measurements on catalyst-coated 0.3 mm-thick membranes yielded improvements of 20-35% in the range 600-900 °C. The silver catalyst was beneficial in overcoming surface kinetic limitations for the thinner 0.3 mm BSCFY membranes, thus suggesting that the critical thickness of BSCFY membranes lies around ∼0.4 mm and validating the ECR measurements.
