Aortic root compliance influences hemolysis in mechanical heart valve prostheses: an in-vitro study

Mechanical heart valve prostheses are known to activate coagulation and cause hemolysis. Both are particularly dependent on the leaflet dynamics, which in turn depends on the flow field in the aortic root influenced by the aortic root geometry and its compliance. Compliance reduction of large vessels occurs in aging patients, both in those who have atherosclerotic diseases and those who do not. In this study we investigated the correlation between hemolysis and the compliance of the proximal aorta in a novel, pulsatile in vitro blood tester using porcine blood. Two mechanical heart valves, the St Jude Medical (SJM) bileaflet valve and a trileaflet valve prototype (Triflo) were tested for hemolysis under physiological conditions (120/80 mm Hg, 4.5 l/min, 70 bpm) and using two different tester setups: with a stiff aorta and with a compliant aorta. Valve dynamics were subsequently analyzed via high-speed videos. In the tests with the Triflo valve, the free plasma hemoglobin increased by 13.4 mg/dl for the flexible and by 19.3 mg/dl for the stiff setup during the 3-hour test. The FFT spectra and closing speed showed slight differences for both setups. Free plasma hemoglobin for the SJM valve was up by 22.2 mg/dl in the flexible and 42.7 mg/dl in the stiff setup. Cavitation induced by the higher closing speed might be responsible for this, which is also indicated by the sound spectrum elevation above 16 kHz.