Related Experiment Video
Updated: May 21, 2026

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Published on: December 7, 2015
Evaluation of field-effect mobility and contact resistance of transistors that use solution-processed single-walled
Qing Cao1, Shu-Jen Han, George S Tulevski
1IBM TJ Watson Research Center, Yorktown Heights, New York 10598, United States. qcao@us.ibm.com
Abstract:
Solution-processed single-walled carbon nanotubes (SWNTs) offer many unique processing advantages over nanotubes grown by the chemical vapor deposition (CVD) method, including capabilities of separating the nanotubes by electronic type and depositing them onto various substrates in the form of ultradensely aligned arrays at low temperature. However, long-channel transistors that use solution-processed SWNTs generally demonstrate inferior device performance, which poses concerns over the feasibility of using these nanotubes in high-performance logic applications. This paper presents the first systematic study of contact resistance, intrinsic field-effect mobility (μ(FE)), and conductivity (σ(m)) of solution-processed SWNTs based on both the transmission line method and the Y function method. The results indicate that, compared to CVD nanotubes, although solution-processed SWNTs have much lower μ(FE) for semiconducting nanotubes and lower σ(m) for metallic nanotubes due to the presence of a higher level of structural defects, such defects do not affect the quality of electric contacts between the nanotube and metal source/drain electrodes. Therefore, solution-processed SWNTs are expected to offer performance comparable to that of CVD nanotubes in ultimately scaled field-effect transistors, where contacts will dominate electron transport instead of electron scattering in the channel region. These results show promise for using solution-processed SWNTs for high-performance nanoelectronic devices.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
Field Effect Transistor

