Related Experiment Video
Updated: May 20, 2026

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Published on: June 9, 2016
A tunable diode laser absorption spectrometer for formaldehyde atmospheric measurements validated by simulation
V Catoire1, F Bernard, Y Mébarki
1Laboratoire de Physique et Chimie de l'Environnement et de l'Espace (LPC2E), CNRS-Université d'Orléans (UMR 6115), Observatoire des Sciences de l'Univers en région Centre, 3A Avenue de la Recherche Scientifique, 45071 Orlnans Cedex 2, France. Valery.Catoire@cnrs-orleans.fr
Abstract:
A tunable diode laser absorption spectrometer (TDLAS) for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer (FT-IR) in a simulation chamber. Formaldehyde was generated in situ in the chamber from reaction of ethene with ozone. Three HCHO ro-vibrational line intensities (at 2909.71, 2912.09 and 2914.46 cm(-1)) possibly used by TDLAS were calibrated by FT-IR spectra simultaneously recorded in the 1600-3200 cm(-1) domain during ethene ozonolysis, enabling the on-line deduction of the varying concentration for HCHO in formation. The experimental line intensities values inferred confirmed the calculated ones from the updated HITRAN database. In addition, the feasibility of stratospheric in situ HCHO measurements using the 2912.09 cm(-1) line was demonstrated. The TDLAS performances were also assessed, leading to a 2sigma detection limit of 88 ppt in volume mixing ratio with a response time of 60 sec at 30 Torr and 294 K for 112 m optical path. As part of this work, the room-temperature rate constant of this reaction and the HCHO formation yield were found to be in excellent agreement with the compiled literature data.
Related Concept Videos
UV–Vis Spectrometers
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Gas Chromatography: Types of Detectors-II

