Related Experiment Video
Updated: May 20, 2026
Roughness Impact of Piezoelectric Dental Scaler on Two Distinct Flowable Composite Filling Materials
Published on: January 10, 2025
Influence of a blue DPSS laser on specimen thickness of composite resins
Dong-In Yun1, Ri-Mo Ku, Sung-Ae Son
1Department of Dental Materials, School of Dentistry and Medical Research Institute, Pusan National University, Yangsan, Korea.
Objective:
The purpose of the present study was to investigate the effect of 473 nm diode-pumped solid state (DPSS) laser on the curing depth of composite resins.
Background Data:
Within the turbid media, light attenuates significantly because of the absorption and scattering.
Materials And Methods:
For the study, three different composite resins and light-curing units (LCUs) (a quartz-tungsten-halogen [QTH], light-emitting-diode [LED], and DPSS laser) were used. The number of photons transmitted through the specimens, degree of conversion (DC), microhardness, and refractive index of the specimens on different thicknesses were evaluated.
Results:
The incident light exponentially decreased within the specimens. Among the LCUs, QTH showed the least photon loss. The DC obtained using the DPSS laser and QTH was significantly greater (p<0.001) than that obtained using LED. The specimens light cured using the DPSS laser showed slightly lower microhardness than that cured by the other LCUs. On each depth, the mean refractive index was not significantly different for the LCUs used. DC, microhardness, and refractive index had inverse linear correlation with specimen thickness despite exponential decrease of photons number. On the other hand, DC, microhardness, and refractive index were linearly correlated to each other regardless of LCUs.
Conclusions:
The DPSS laser of 473 nm achieved a similar level of polymerization within the specimens as those of the other LCUs even with much lower light intensity. This laser can be applied as a light source for light curing of composite resins.
