Time-dependent failure of amorphous poly-D,L-lactide: influence of molecular weight

The specific time-dependent deformation response of amorphous poly(lactic acid) (PLA) is known to lead to rapid failure of these materials in load-bearing situations. We have investigated this phenomenon in uniaxial compression on P(L)DLLA samples with various molecular weights. The experiments revealed a strong dependence of the yield stress on the applied strain rate. Lower molecular weights showed identical deformation kinetics as higher molecular weights, albeit at lower stress values. This dependence on molecular weight was incorporated into an Eyring-equation by introducing mobility through a virtual temperature that is shifted by the deviation of the T(g) from T(g,∞). Stress-dependent lifetime of polymer constructs was described by the use of this modified Eyring-equation, combined with a critical plastic strain. This model proves useful in predicting the molecular weight dependence of the time to failure, although it slightly overestimates life time at low stress levels for a material with very low molecular weight. The versatility of the model is demonstrated on e-beam sterilized PLDLLA, where the resulting reduction in molecular weight induces a substantial decrease in lifetime. A single T(g) measurement provides sufficient information to predict the decrease in lifetime.