Related Experiment Video
Updated: May 19, 2026

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Output feedback trajectory stabilization of the uncertainty DC servomechanism system
Carlos Aguilar-Ibañez1, Ruben Garrido-Moctezuma, Jorge Davila
1CIC-IPN, Av. Juan de Dios Bátiz s/n Esq. Manuel Othón de M., Unidad Profesional Adolfo López Mateos, Col. Nueva Industrial Vallejo, Del. Gustavo, A. Madero, C.P. 07738 D.F., Mexico. caguilar@cic.ipn.mx
Abstract:
This work proposes a solution for the output feedback trajectory-tracking problem in the case of an uncertain DC servomechanism system. The system consists of a pendulum actuated by a DC motor and subject to a time-varying bounded disturbance. The control law consists of a Proportional Derivative controller and an uncertain estimator that allows compensating the effects of the unknown bounded perturbation. Because the motor velocity state is not available from measurements, a second-order sliding-mode observer permits the estimation of this variable in finite time. This last feature allows applying the Separation Principle. The convergence analysis is carried out by means of the Lyapunov method. Results obtained from numerical simulations and experiments in a laboratory prototype show the performance of the closed loop system.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Control Systems
At the heart...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Second Order systems I
By reinterpreting the system, one can derive the closed-loop transfer function, which...