Colloid transport in dolomite rock fractures: effects of fracture characteristics, specific discharge, and ionic...

The effects of fracture characteristics, specific discharge, and ionic strength on microsphere transport in variable-aperture dolomite rock fractures were studied in a laboratory-scale system. Fractures with different aperture distributions and mineral compositions were artificially created in two dolomite rock blocks. Transport tests were conducted with bromide and carboxylate-modified latex microspheres (20, 200, and 500 nm diameter). Under overall unfavorable attachment conditions, there was significant retention of the 20 nm microsphere and minimal retention of the 500 nm microsphere for all conditions examined. Aperture variability produced significant spatial variation in colloid transport. Flushing with low ionic strength solution (1 mM) following microsphere transport at 12 mM ionic strength solution produced a spike in effluent microsphere concentrations, consistent with retention of colloids in secondary energy minima. Surface roughness and charge heterogeneity effects may have also contributed to the effect of microsphere size on retention. Matrix diffusion influenced bromide transport but was not a dominant factor in transport for any microsphere size. Calibrated one-dimensional, two-site kinetic model parameters for colloid transport in fractured dolomite were sensitive to the physical and chemical properties of both the fractured dolomite and the colloids, indicating the need for mechanistic modeling for accurate prediction.