Related Experiment Video
Updated: May 19, 2026

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
Published on: November 20, 2014
Experimental evidence for self-limiting reactive flow through a fractured cement core: implications for
Nicolas J Huerta1, Marc A Hesse, Steven L Bryant
1Jackson School of Geosciences, The University of Texas at Austin, Austin, Texas 78712, United States. njhuerta@utexas.edu
Abstract:
We present a set of reactive transport experiments in cement fractures. The experiments simulate coupling between flow and reaction when acidic, CO(2)-rich fluids flow along a leaky wellbore. An analog dilute acid with a pH between 2.0 and 3.15 was injected at constant rate between 0.3 and 9.4 cm/s into a fractured cement core. Pressure differential across the core and effluent pH were measured to track flow path evolution, which was analyzed with electron microscopy after injection. In many experiments reaction was restricted within relatively narrow, tortuous channels along the fracture surface. The observations are consistent with coupling between flow and dissolution/precipitation. Injected acid reacts along the fracture surface to leach calcium from cement phases. Ahead of the reaction front, high pH pore fluid mixes with calcium-rich water and induces mineral precipitation. Increases in the pressure differential for most experiments indicate that precipitation can be sufficient to restrict flow. Experimental data from this study combined with published field evidence for mineral precipitation along cemented annuli suggests that leakage of CO(2)-rich fluids along a wellbore may seal the leakage pathway if the initial aperture is small and residence time allows mobilization and precipitation of minerals along the fracture.
Related Concept Videos
Permeability of Concrete
Porosity in Cement Paste
The balance of water to cement in the mix is critical—it...
Pressure Variation in a Fluid at Rest
When measuring pressure at two different levels within the fluid, the difference in pressure...
Shrinkage in Concrete
When concrete is still in its plastic state, it can undergo a decrease in volume by about 1% of its absolute volume. This decrease is known as plastic shrinkage. It arises either...
Pore Size Distribution
Adequate...
Design Example: Creating a Hydraulic Model of a Dam Spillway

