Electro-Fenton treatment of mature landfill leachate in a continuous flow reactor

The treatment of mature landfill leachate by EF-Fere (also called Fered-Fenton) method was carried out in a continuous stirred tank reactor (CSTR) using Ti/RuO(2)-IrO(2)-SnO(2)-TiO(2) mesh anodes and Ti mesh cathodes. The effects of important parameters, including initial pH, inter-electrode gap, H(2)O(2) to Fe(2+) molar ratio, H(2)O(2) dosage and hydraulic retention time, on COD removal were investigated. The results showed that the complete mixing condition was fulfilled in the electrochemical reactor employed in this study and COD removal followed a modified pseudo-first order kinetic model. The COD removal efficiency increased with the decrease of H(2)O(2) to Fe(2+) molar ratio and hydraulic retention time. There existed an optimal inter-electrode gap or H(2)O(2) dosage so that the highest COD removal was achieved. Nearly the same COD removal was obtained at initial pH 3 and 5, but the steady state was quickly achieved at initial pH 3. The organic pollutants in the leachate were analyzed through a gas chromatography coupled with mass spectrometry (GC-MS) system. About 73 organics were detected in the leachate, and 52 of which were completely removed after EF-Fere process.