[Study on catalytic oxidation of benzene by microwave heating]

The performance in catalytic oxidation of benzene was investigated in two different heating modes, microwave heating and conventional electric furnace heating. The effects of copper (Cu)-manganese (Mn) mass ratio, doping dose of cerium (Ce) and calcination temperature on the catalytic activity of Cu-Mn-Ce/molecular sieve catalyst were also checked in catalytic oxidation of benzene with microwave heating, and the catalysts were subsequently characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The results showed that the catalyst had better catalytic activity for the oxidation of benzene under microwave heating than electric furnace heating, and high oxidation efficiency for benzene was reached due to the "local hot spots" and dipole polarization effect of microwave and stable bed reaction temperature. Under the conditions of Cu, Mn and Ce mass ratio 1:1:0.33 and calcination temperature 500 degrees C, the catalyst had the optimal catalytic activity for benzene oxidation, and its light-off temperature and complete combustion temperature were 165 degrees C and 230 degrees C, respectively. It was indicated by characteristics of XRD and SEM that the presence of copper and manganese oxides and Cu1.5Mn1.5O4 with spinel crystal improved the catalytic activity of the catalyst, and the doping of Ce promoted the dispersion and regularization of active components. High calcination temperature led to the sintering of the catalyst surface and agglomeration of active components, which decreased the catalytic activity of the catalyst in the catalytic oxidation