Related Experiment Video
Updated: May 15, 2026

Electrochemical Preparation of Poly(3,4-Ethylenedioxythiophene) Layers on Gold Microelectrodes for Uric Acid-Sensing Applications
Published on: July 28, 2021
Poly(3,4-ethylenedioxythiophene)-modified Ni/silicon microchannel plate electrode for the simultaneous determination
Shiji Yu1, Chunhua Luo, Lianwei Wang
1Key Laboratory of Polarized Materials and Devices, Ministry of Education, East China Normal University, Shanghai, 200241, China.
Abstract:
A Ni/silicon microchannel plate (Ni/Si MCP) electrode modified with poly(3,4-ethylenedioxythiophene) (PEDOT) was successfully fabricated. The analytical performance of prepared electrode for the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA) was investigated by using cyclic voltammetry and differential pulse voltammetry (DPV). The sensitivities for AA, DA and UA obtained by DPV are 5.39 A m(-2) mM(-1), 0.054 A m(-2) μM(-1) and 0.022 A m(-2) μM(-1), respectively. The calculated detection limits were 10 μM (AA), 1.5 μM (DA) and 2.7 μM (UA). The prepared electrode was successfully applied to the detection of AA, DA and UA in urine samples. The experiments illustrate that Ni/Si MCP is a good electrode material which provides a large surface-to-volume ratio and enhances the selectivity and sensitivity.
More Related Videos
13:35A Convenient Method for Extraction and Analysis with High-Pressure Liquid Chromatography of Catecholamine Neurotransmitters and Their Metabolites
Published on: March 1, 2018
09:51TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples
Published on: September 19, 2025