Related Experiment Video
Updated: May 15, 2026

A Method to Test the Efficacy of Handwashing for the Removal of Emerging Infectious Pathogens
Published on: June 7, 2017
Efficacy of surgical hand scrub products based on chlorhexidine is largely overestimated without neutralizing agents
Günter Kampf1, Mirja Reichel, Angela Hollingsworth
1Bode Science Center, Bode Chemie GmbH, Hamburg, Germany. guenter.kampf@bode-chemie.de
Background:
Surgical hand antiseptics often contain chlorhexidine gluconate (CHG). There are doubts that the full effect measured for these products might only be achieved after sampling because of a lack of valid neutralizing agents (NAs) in the sampling fluid.
Methods:
We measured the efficacy of Avagard CHG and Hibiclens for 11 applications over 5 days according to the manufacturers' instructions. NAs were added to the sampling fluid and the dilution fluid (group 1) or to only the dilution fluid (group 2). In a third group, NAs were added to the dilution fluid only, and cream was applied after the final scrub on days 1 to 4. Neutralization was validated according to American Society for Testing and Materials International standard 1054 using Staphylococcus epidermidis.
Results:
When NAs were not added to the sampling fluid, both products were very effective, with a mean log(10) reduction in flora of 3.32 ± 0.53 for Avagard and 3.68 ± 0.52 for Hibiclens on day 5. When NAs were included in the sampling fluid, however, the immediate efficacy was significantly lower, at 2.75 ± 0.55 and 3.14 ± 0.50, respectively. A lack of NAs in the sampling fluid resulted in overestimation of efficacy by a factor of between 0.3 and 1.1 log(10).
Conclusion:
Efficacy studies carried out without NAs in the sampling fluid for products with CHG should be critically assessed.
Related Concept Videos
Hand hygiene
Hand washing...
Antimicrobial Effectiveness
Chemical Agents for Microbial Control
Handwashing I: Introduction and Types of Equipment
Hand wash basins in clinical areas should have faucets that can be turned on and off without using the hands; that is, they should be non-touch or lever-operated.
Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail paint...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
