Preparation of poly(phthalazinone-ether-sulfone) sponge-like ultrafiltration membrane

Poly(phthalazinone-ether-sulfone) (PPES) polymer is a relatively newly developed material with a bis(4-fluorodiphenyl) sulfone group. The formation of the PPES membrane by wet-phase inversion can proceed according to a slow or fast gelation method. These formation mechanisms were studied experimentally. The resulting membrane morphology was investigated using both optical and scanning electron micrography. The effects of PPES concentration and two additives, polyvinylpyrrolidone (PVP) and oxalic acid (OA), on the apparent viscosity and gelation rate of PPESK/NMP solutions and membrane performance have also been investigated. It was found that the gelation rate is important to obtain a sponge-like membrane structure, however favored by a fast gelation rate. The membrane obtained by a fast gelation rate showed a high pure water flux and rejection of bovine serum albumin (BSA), contrary to previous findings. On the basis of the experimental results, the actual membrane structure and pure water flux were related, and in agreement with the optical micrograph and gelation rate, respectively. The current results provide a fundamental insight in this novel copolymer, useful in future applications, especially in the membrane formation process.