Related Experiment Video
Updated: May 13, 2026

A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
Vibration and acoustic response of an orthotropic composite laminated plate in a hygroscopic environment
Xin Zhao1, Qian Geng, Yueming Li
1State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an, 710049, People's Republic of China.
Abstract:
This paper is a study of the vibration and acoustic response characteristics of orthotropic laminated composite plate with simple supported boundary conditions excited by a harmonic concentrated force in a hygroscopic environment. First the natural vibration of the plate with the in-plane forces induced by hygroscopic stress is obtained analytically. Secondly, the sound pressure distribution of the plate at the far field is obtained using the Rayleigh integral. Furthermore, the sound radiation efficiency is deduced. Third, different ratios of elastic modulus in material principal directions are set to research the effects of increasing stiffness of the orthotropic plate on the vibration and acoustic radiation characteristics. Finally, to verify the theoretical solution, numerical simulations are also carried out with commercial finite software. It is found that the natural frequencies decrease with the increase of the moisture content and the first two order modes interconvert at high moisture content. The dynamic response and sound pressure level float to lower frequencies with elevated moisture content. Acoustic radiation efficiency generally floats to the low frequencies and decreases with an increase of moisture content. The dynamic and acoustic responses reduce and the coincidence frequency decreases with the enhanced stiffness.
More Related Videos
Related Concept Videos
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each material's...
Fluid Pressure over Flat Plate of Constant Width
The resultant force...
Fluid Pressure over Curved Plate of Constant Width
Fluid Pressure over Flat Plate of Variable Width
The pressure distribution on the plate can be calculated by determining the force that acts on a differential area strip of the plate. Thus, the magnitude of the force is equal to the...
Flexural Stress
Hooke's Law states that within the material's elastic limits, stress is directly proportional to strain. In a member experiencing a bending moment, the strain at any point is relative to its distance...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...

