Related Experiment Video
Updated: May 12, 2026
A Mouse Model of Lumbar Spine Instability
Published on: April 23, 2021
Instantaneous center of rotation behavior of the lumbar spine with ligament failure
Yunus Alapan1, Cihan Demir, Tuncay Kaner
1Department of Mechanical Engineering, Yildiz Technical University, Istanbul.
Object:
The goal of this study was to investigate the effect of ligament failure on the instantaneous center of rotation (ICR) in the lower lumbar spine.
Methods:
A 3D finite element model of the L4-5 segment was obtained and validated. Ligament failure was simulated by reducing ligaments in a stepwise manner from posterior to anterior. A pure bending moment of 7.5 Nm was applied to the model in 3 anatomical planes for the purpose of validation, and a 6-Nm moment was applied to analyze the effect of ligament failure. For each loading case, ligament reduction step, and load increment, the range of motion of the segment and the ICR of the mobile (L-4) vertebra were calculated and characterized.
Results:
The present model showed a consistent increase in the range of motion as the ligaments were removed, which was in agreement with the literature reporting the kinematics of the L4-5 segment. The shift in the location of the ICR was below 5 mm in the sagittal plane and 3 mm in both the axial and coronal planes.
Conclusions:
The location of the ICR changed in all planes of motion with the simulation of multiple ligament injury. The removal of the ligaments also changed the load sharing within the motion segment. The change in the center of rotation of the spine together with the change in the range of motion could have a diagnostic value, revealing more detailed information on the type of injury, the state of the ligaments, and load transfer and sharing characteristics of the segment.
