Related Experiment Video
Updated: May 10, 2026

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing
Published on: June 28, 2024
Anisotropy of dynamic acoustoelasticity in limestone, influence of conditioning, and comparison with nonlinear
G Renaud1, J Rivière, S Haupert
1Laboratoire d'imagerie paramétrique, UPMC Paris 6, CNRS UMR 7623, 15 rue de l'école de médecine, 75006 Paris, France. renaud_gu@yahoo.fr
Abstract:
Anisotropy of wave velocity and attenuation induced by a dynamic uniaxial strain is investigated by dynamic acoustoelastic testing in limestone. Nonlinear resonance spectroscopy is performed simultaneously for comparison. A compressional resonance of the sample at 6.8 kHz is excited to produce a dynamic strain with an amplitude varied from 10(-7) to 10(-5). A sequence of ultrasound pulses tracks variations in ultrasonic velocity and attenuation. Variations measured when the ultrasound pulses propagate in the direction of the uniaxial strain are 10 times larger than when the ultrasound propagation occurs perpendicularly. Variations consist of a "fast" variation at 6.8 kHz and an offset. Acoustically induced conditioning is found to reduce wave velocity and enhance attenuation (offset). It also modifies "fast" nonlinear elastodynamics, i.e., wave amplitude dependencies of ultrasonic velocity and attenuation. At the onset of conditioning and beyond, different excitation amplitudes bring the material to non-equilibrium states. After conversion of velocity-strain dynamic relations into elastic modulus-strain dynamic relations and integration with respect to strain, the dynamic stress-strain relation is obtained. Analysis of stress-strain hysteresis shows that hysteretic nonlinear elasticity is not a significant source of the amplitude-dependent dissipation measured by nonlinear resonance spectroscopy. Mechanisms causing conditioning are likely producing amplitude-dependent dissipation as well.
More Related Videos
Related Concept Videos
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...
Sound Waves: Resonance
Concept of Resonance and its Characteristics
IR Spectroscopy: Hooke's Law Approximation of Molecular Vibration
According to Hooke's law, the vibrational frequency is directly proportional to the...
Resonance and Hybrid Structures
Resonance Structures and Resonance Hybrids
The Lewis structure of a nitrite anion (NO2−) may actually be drawn in two different ways, distinguished by the locations of the N–O and N=O bonds.

