Related Experiment Video
Updated: May 9, 2026

Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods
Published on: September 14, 2017
Highly sensitive ZnO nanorod- and nanoprism-based NO2 gas sensors: size and shape control using a continuous
Liang Shi1, Anupriya J T Naik, Josephine B M Goodall
1Department of Chemistry, University of Science and Technology of China, Hefei 230026, PR China. sliang@ustc.edu.cn
Abstract:
Continuous hydrothermal flow synthesis of crystalline ZnO nanorods and prisms is reported via a new pilot-scale continuous hydrothermal reactor (at nominal production rates of up to 1.2 g/h). Different size and shape particles of ZnO (wurtsite structure) were obtained via altering reaction conditions such as the concentration of either additive H2O2 or metal salt. Selected ZnO samples (used as prepared) were evaluated as solid oxide gas sensors, showing excellent sensitivity toward NO2 gas. It was found that both the working temperature and gas concentration significantly affected the NO2 gas response at concentrations as low as 1 ppm.
More Related Videos
12:20Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
10:39Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal
Published on: January 15, 2016