Related Experiment Video
Updated: May 9, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Phosphorus removal in a sulfur-limestone autotrophic denitrification (SLAD) biofilter
Ruihua Li1, Yulin Yuan, Xinmin Zhan
1State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, 163 Xianlin Avenue, Nanjing, 210046, China, liruihua@nju.edu.cn.
Abstract:
The sulfur-limestone autotrophic denitrification (SLAD) biofilter was able to remove phosphorous from wastewater during autotrophic denitrification. Parameters influencing autotrophic denitrification in the SLAD biofilter, such as hydraulic retention time (HRT), influent nitrate (NO3(-)), and influent PO4(3-) concentrations, had significant effects on P removal. P removal was well correlated with total oxidized nitrogen (TON) removed in the SLAD biofilter; the more TON removed, the more efficient P removal was achieved. When treating the synthetic wastewater containing NO3(-)-N of 30 mg L(-1) and PO4(3-)-P of 15 mg L(-1), the SLAD biofilter removed phosphorus of 45% when the HRT was 6 h, in addition with TN removal of nearly 100%. The optimal phosphorus removal in the SLAD biofilter was around 60%. For the synthetic wastewater containing a PO4(3-)-P concentration of 15 mg L(-1), the main mechanism of phosphorus removal was the formation of calcium phosphate precipitates.
More Related Videos
Related Concept Videos
Microbial Bioremediation of Uranium
Sulfur Assimilation
Acid Mine Drainage
The Phosphorus Cycle
Metabolism of Chemolithotrophs
Factors Affecting Solubility

