Related Experiment Video
Updated: May 9, 2026

Light Enhanced Hydrofluoric Acid Passivation: A Sensitive Technique for Detecting Bulk Silicon Defects
Published on: January 4, 2016
Analysis of flicker noise for improved data retention characteristics in silicon-oxide-high-k-oxide-silicon flash
1Department of Electronics Engineering, Chungnam National University, Daejeon 305-764, Korea.
Abstract:
In this paper, we fabricate planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and the planar-type SOHOS devices with N2 implantation of 3 x 10(15) dose in a tunneling oxide to determine the impact of N2 implantation in the tunneling oxide of a memory device. The N2 implantation device has better retention characteristics than the device with no implantation. In order establish the correlation between N2 implantation and retention characteristic improvement, the low frequency noise (1/f noise) characteristic is investigated. The normalized drain current noise (S(ID)/I(D)2) level of the N2 implantation device is higher than that of the device with no implantation, which means that N2 implantation causes more trap formation near the interface. Considering that N2 implantation does not affect the DC transfer characteristics, such as mobility and sub-threshold slope, this finding indicates that the increase in the 1/f noise level is due to oxide traps rather than to interface traps. Therefore, the retention characteristic improvement in the N2 implantation device can be explained by the generation of higher number of oxide traps and an increase in the potential barrier blocking the leakage path in the tunneling oxide.
Related Concept Videos
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
Non-ohmic Devices
Consider a simple circuit consisting of a battery, a diode, and a resistor. A diode...

