[Study on water quality monitoring scheme based on non-point source pollution]

In order to improve standardization and normalization of non-point source pollution monitoring, this paper summarized the non-point source pollution monitoring scheme that based on conventional technology condition. The scheme firstly emphasized the preparation work before monitoring, including situation investigation and index selection of the monitoring area and so on; In the process of establishing monitoring scheme, the monitoring area was divided into three types: city, agriculture and watershed. Take urban area monitoring scheme for Xi'an as an example, through dividing function zone setting sampling point, summarized sampling time interval, frequency and sampling methods during a rainfall process. An irrigation district was an example for agricultural monitoring scheme, through unit division, setting sampling point at the approach channel and drain channel, introduced sampling times, interval time and so on in the process of irrigation. Watershed monitoring scheme's example was the Weihe GuanZhong section, raised the setting principle of each sample section, and analyzed each section's sampling law in the process of rainfall. Finally the principal character of different non-point source pollution monitoring areas was discussed, and concluded that non-point source pollution monitoring scheme is the base of non-point source pollution study and control.