Phosphorus removal in a membrane-assisted BNR process with focus on evolutions of PAOs and DPAOs
1College of Architecture and Civil Engineering, Beijing University of Technology, 100 Ping Le Yuan, Chao Yang District, Beijing 100124, China E-mail: zhaozhaomembrane@yahoo.cn; W-Z-Z@163.com.
Abstract:
A bench-scale UCT (University of Cape Town)-type membrane bioreactor (UCT-MBR) fed with low-strength synthetic wastewater was operated to investigate phosphorus removal with reference to poly-phosphate accumulating organisms (PAOs) and denitrifying poly-phosphate accumulating organisms (DPAOs). A series of kinetic assays of PAOs and DPAOs were also conducted to analyze the metabolic activities of PAOs and DPAOs. Results showed that 93% of chemical oxygen demand (COD) and 77% of total nitrogen could be removed at 0.08 kgCOD kg(-1) MLSS d(-1) and 0.015 kgN kg(-1) MLSS d(-1) loading (MLSS: mixed liquor suspended solids). Removal efficiencies of total phosphorus increased during the experimental phase, with an ultimate removal efficiency of 96.1%. Kano and Kaer increased from 1.95 and 6.29 mgPO4(3-)-P g(-1) MLSS h(-1) to 5.47 and 11.13 mgPO4(3-)-P g(-1) MLSS h(-1) for DPAOs and PAOs respectively, with the increased ratio of DPAOs to PAOs from 31 to 49% implying DPAO metabolic activity increased faster than that of PAOs during the DPAO accumulation phase. Pano-uptake increased by 6.6 mg L(-1) and the ratio of PTano-uptake to PTupt increased from 58.97 to 91.62%. The ratio of DPAOs to PAOs tended to stabilize at around 50% over time.
Related Concept Videos
Bioplastics
The Phosphorus Cycle
Factors Affecting Solubility


