Related Experiment Video
Updated: May 7, 2026

Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
Published on: August 12, 2013
Composite polymer electrolytes for fuel cell applications: filler-induced effect on water sorption and transport
Barbara Mecheri1, Valeria Felice, Alessandra D'Epifanio
1Department of Chemical Science and Technology & NAST Center, University of Rome Tor Vergata, Via della Ricerca Scientifica, 00133 Rome (Italy). barbara.mecheri@uniroma2.it.
Abstract:
Nafion- and sulfonated polysulfone (SPS)- based composite membranes were prepared by incorporation of SnO2 nanoparticles in a wide range of loading (0${ \div }$35 wt. %). The composites were investigated by differential scanning calorimetry, dynamic vapor sorption and electrochemical impedance spectroscopy to study the filler effect on water sorption, water mobility, and proton conductivity. A detrimental effect of the filler was observed on water mobility and proton conductivity of Nafion-based membranes. An increase in water mobility and proton conductivity was instead observed in SPS-based samples, particularly at low hydration degree. Analysis of the water sorption isotherms and states of water revealed that the presence of SnO2 in SPS enhances interconnectivity of hydrophilic domains, while not affecting the Nafion microstructure. These results enable the design of suitable electrolyte materials that operate in proton exchange membrane fuel cell conditions.
More Related Videos
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022
06:34Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites
Published on: September 19, 2020
Related Concept Videos
Ion Exchange
Batteries and Fuel Cells
Additives and Fillers in Concrete
The...