A one-step extraction/clean-up method for determination of PCBs, PBDEs and HBCDs in environmental solid matrices

A selective pressurized liquid extraction (S-PLE) method was developed for rapid determination of 3 classes of halogenated organic contaminants in indoor dust, soil and sediment samples. The optimised method used 3 : 2 v/v n-hexane-dichloromethane for extraction of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs). Extraction was performed at 90 °C for 5 min followed by 4 min static time under 1500 psi. Good recoveries of target analytes were obtained after 3 extraction cycles. In-cell cleanup was performed using 10 g of 44% H2SO4 acid silica and 5 g of florisil (secondary fat retainer), while copper powder was used to remove elemental sulfur. The method was validated using NIST SRM2585 and SRM 1941b in addition to an in-house previously characterised soil sample. Measured concentrations of target compounds showed good agreement with the certified values with RSD < 20% indicating the good accuracy and precision of the S-PLE method. Clean extracts provided low noise levels resulting in low method detection limits (<0.03 ng g(-1)) and LOQs (<0.1 ng g(-1)). The method developed was applied successfully to real environmental samples and it provided various advantages over traditional methods including reduced solvent consumption and analysis time, minimal sample contamination and high sample throughput which can be beneficial for environmental monitoring programs dealing with large numbers of samples.