Related Experiment Video
Updated: May 6, 2026

Use of Capillary Aerosol Generator in Continuous Production of Controlled Aerosol for Non-Clinical Studies
Published on: April 12, 2022
[Portable gas chromatography for determining airborne acrylonitrile in workplaces]
Jian Liu1, Feng Zhang, Bao-li Zhu
1Jiangsu Provincial Center for Disease Prevention and Control, Nanjing 210009, China.
Objective:
To establish a method for rapid determination of airborne acrylonitrile using a portable gas chromatograph.
Methods:
A single standard sample of acrylonitrile was prepared in a laboratory and sampled by the built-in constant flow pump of the portable gas chromatograph. The sample was then preconcentrated by the preconcentrator, thermally desorbed, separated by capillary columns, and detected by a micro argon ionization detector to determine the retention time. Retention time was then used to perform qualitative analysis. Under the set condition of gas chromatography, the external standard method was used to create a standard curve for quantitative analysis of acrylonitrile.
Results:
The linear range of acrylonitrile on the portable gas chromatograph was 0.25 to 3.00 mg/m(3). The regression equation was y = 10(-5) x-0.0275, r = 0.9977. The limit of detection was 0.005 mg/m(3), and the lower limit of quantification was 0.25 mg/m(3). The relative standard deviation was lower than 7.09%, and the degree of accuracy was 91.09-105.54%.
Conclusion:
Portable gas chromatography is a simple, repeatable, and accurate method for rapid determination of airborne acrylonitrile.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....

