Related Experiment Video
Updated: May 6, 2026

Installation of the Big Box Biochar Kiln for Biochar Production
Published on: October 27, 2023
Field performance of woodburning stoves in crested butte, Colorado
D R Jaasma1, M Gundappa, M R Champion
1Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, 24061, Blacksburg, VA, USA.
Abstract:
The carbon monoxide (CO) and particulate matter (PM) emissions of woodburning stoves have been measured under field conditions. Both conventional airtight stoves and newly installed airtight stoves certified by the U.S. Environmental Protection Agency to be low emitters of PM were monitored. The certified stoves were of two types, catalytic and noncatalytic. Compared to the conventional stoves, PM emission rates (g/hr) were reduced approximately 70% by both types of certified stoves. The CO emission rates were reduced 71% and 53% by catalytic and noncatalytic stoves respectively. These rate reductions occur because the certified stoves burn cleaner (less pollutant formation per kg of wood burned) and the average burn rate of certified stoves in field use is less than the average burn rate of conventional stoves.
Related Concept Videos
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Masonry in Cold and Hot Weather Conditions
Other key practices include keeping masonry units...
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...
Introduction to Wood
The structural integrity of the...

