Related Experiment Video
Updated: May 3, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Effects of ionic strength on membrane fouling in a membrane bioreactor
Fangyuan Wang1, Meijia Zhang1, Wei Peng1
1College of Geography and Environmental Sciences, Zhejiang Normal University, Jinhua 321004, PR China.
Abstract:
In this study, the effects of ionic strength on membrane fouling in a membrane bioreactor (MBR) were investigated. Ionic strength in range of 0.005-0.05mol/L exerted no apparent impacts on the resistance of virgin membrane, fouled membrane and pore clogging. Thermodynamic analysis showed existences of a secondary energy minimum and an energy barrier in the process of the sludge flocs approaching to membrane surface. Increase in ionic strength could significantly reduce the energy barrier. It was revealed that there existed a critical ionic strength above that the energy barrier would disappear, facilitating adhesion of the foulants. Cake resistance was not significantly affected by the ionic strength, but highly depended on SMP in supernatant. The high cake resistance caused by SMP could be explained by the osmotic pressure mechanism. The obtained results provided new insights into membrane fouling in MBRs.
Related Concept Videos
Ionic Strength: Overview
Ionic Strength: Effects on Chemical Equilibria
In this solution, the primary...
Factors Affecting Activity Coefficient
The activity coefficient value for an ion is close to one when the solution has almost zero ionic strength, i.e., when the solution shows close to ideal behavior. As the ionic strength of the solution increases from 0 to 0.1 mol/L, a...
Bioreactor Controls-II
Bioreactor Controls-I
Detergent Purification of Membrane Proteins

