Ultra-long-range symmetric plasmonic waveguide for high-density and compact photonic devices

This study reports a symmetric hybrid plasmonic waveguide consisting of a cylindrical metal nanowire surrounded by low-index SiO₂ and high-index Si covered with SiO₂. The symmetric circumambience relative to the metal nanowire significantly facilitates the present design to minimize the energy attenuation resulting from Ohmic losses while retaining highly confined modes guided in the low-index nanoscale gaps between the metal nanowire and the high-index Si. The geometric dependence of the mode characteristics on the proposed structure is analyzed in detail, showing long propagation lengths beyond 10 mm with normalized mode areas on the order of 10⁻². In addition to enabling the building of long-range plasmonic circuit interconnects, the compactness and high-density integration of the proposed structure are examined by analyzing crosstalk in a directional coupler composed of two such waveguides and bending losses for a 90° bend. A relatively short coupling length of 1.16 μm is obtained at a center-to-center separation of 0.26 μm between adjacent waveguides. Increasing the separation to 1.65 μm could completely prevent coupling between waveguides. Power transmission exceeds 80% in the case of a 90° bend with small radius of curvature of 0.5 μm. Moreover, the dependence of spectral response on coupling length and the transmission of a 90° bend, ranging from telecom wavelengths of 1.40 to 1.65 μm, are investigated. Over a wide wavelength range, a strong coupling length dependence on wavelength and a high transmission for a 90° bend also make the proposed plasmonic waveguide promising for the realization of wavelength-selective components.