Enhanced device performance of germanium nanowire junctionless (GeNW-JL) MOSFETs by germanide contact formation with
Young Gwang Yoon1, Tae Kyun Kim, In-Chan Hwang
1Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST) , 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Republic of Korea.
Abstract:
In this study, germanium nanowire junctionless (GeNW-JL) metal-oxide-semiconductor-field-effect-transistors (MOSFETs) exhibited enhanced electrical performance with low source/drain (S/D) contact resistance under the influence of Ar plasma treatment on the contact regions. We found that the transformation of the surface oxide states by Ar plasma treatment affected the S/D contact resistance. With Ar plasma treatment, the germanium dioxide on the GeNW surface was effectively removed and increased oxygen vacancies were formed in the suboxide on the GeNW, whose germanium-enrichment surface was obtained to form a germanide contact at low temperature. After a rapid thermal annealing process, Ni-germanide contacts were formed on the Ar-plasma-treated GeNW surface. Ni-germanide contact resistance was improved by more than an order of magnitude compared to that of the other devices without Ni-germanide contact. Moreover, the peak field effect mobility value of the GeNW-JL MOSFETs was dramatically improved from 15 cm(2)/(V s) to 550 cm(2)/(V s), and the Ion/off ratio was enhanced from 1 × 10 to 3 × 10(3) due to Ar plasma treatment. The Ar plasma treatment process is essential for forming uniform Ni-germanide-contacts with reduced time and low temperature. It is also crucial for increasing mass productivity and lowering the thermal budget without sacrificing the performance of GeNW-JL MOSFETs.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...


