Sorption studies on Cr (VI) removal from aqueous solution using cellulose grafted with acrylonitrile monomer

Graft copolymerization of acrylonitrile on to cellulosic material derived from sisal fiber can be initiated effectively with ceric ammonium nitrate. The grafting conditions were optimized by changing the concentration of initiator and monomer. The change in crystallinity of the grafted polymeric samples was concluded from the XRD patterns. The prepared cellulose grafted acrylonitrile copolymer was used as an adsorbent to remove Cr (VI) ions from aqueous solutions. The efficiency of the adsorbent was identified from the variation in the percentage of adsorption with contact time, adsorbent dose and pH. From the observed results it was evident that the adsorption of metal ions increases with the increase in contact time and metal ion concentration. An optimum pH was found to be 5.0 for the removal of Cr (VI) from the aqueous solution. The results of the Langmuir, Freundlich, and pseudo first- and second-order studies revealed that the adsorption was found to fit well with Freundlich isotherm and follows pseudo second-order kinetics. From the above results, it was concluded that the cellulose-g-acrylonitrile copolymer was found to be an efficient adsorbent for the removal of Cr (VI) from aqueous waste generated from industries.